Jan 16, 2014 The link is fine now. Are Phoenix & Insyde completely different in their implementation that this method can not be used to update Insyde BIOS at all? As for my Lenovo G460 BIOS (Insyde H2O), the latest BIOS update bricked the unit and now it does not read the flash drive anymore to either restore the old BIOS or update to new BIOS. Tools for every major stage of the system development lifecycle. Our EDK-II based UEFI BIOS tools packages address the critical needs of every major stage of the system development lifecycle including product development, validation, provisioning, customization and post-production end-user requirements, and Insyde Software provides several unique tools to serve the development needs of each stage.
TQ provides tools from Insyde® for the UEFI BIOS which allows the customization of the BIOS.
Please Note: The following Tools are only available on request.
For further Information please contact Support.
- H2OFFT™ (Firmware Flash Tool) for performing BIOS Update
- H2OUVE™ (UEFI Variable Editor) to customize default BIOS Options
- H2OLRT™ (Logo Replacement Tool) for a customized boot logo
- H2OSDE™ (SMBIOS Data Editor) to facilitate easy modification of any SMBIOS (DMI) field
- H2OEZE™ (Easy Binary Editor) to edit binaries in the BIOS, including Option ROMs, driver binaries, logos, and Setup values
Further Tools are only available from Insyde®:
- H2ODDT™ (Developer Debug Tool) for source code level Diagnostic and Debugging
- H2OPCM™ (Power Cycle Manager) for assisting in power-cycling the system while watching for initialization failures
- H2OELV™ (Event Log Viewer)
Using BIOS Tools
H2OFFT (Firmware Flash Tool)
H2OFFT (Firmware Flash Tool) to perform BIOS updates under supported OS environment.
Prerequisites
- FAT formatted USB stick with at least 32 MB of free storage space
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
- Insyde Firmware Flash Tool H2OFFT-Sx64.efi (BIOS-Tools → H2OFFT (Firmware Flash Tool) → UEFI-Shell → InsydeH2OFFT_x86_EFI_Package_* → InsydeH2OFFT_x86_EFI_* → X64 → H2OFFT-Sx64.efi)
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and navigate into the EFI Shell (Boot Manager > Internal EFI Shell)
4. After starting the EFI Shell switch path to the USB stick by typing fs0:.This depends on the amount of conected mass storage devices; with command ls you can check the content of the path.
5. The following command examples shows how to use the H2OFFT Tool.
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
- Insyde Firmware Flash Tool folder InsydeH2OFFT_x86_WIN64_* (BIOS-Tools → H2OFFT (Firmware Flash Tool) → Windows → X64 → InsydeH2OFFT_x86_WINx64_*)
- Copy appropriate BIOS file for your TQ module to the folder InsydeH2OFFT_x86_WIN64_*
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and run Command Prompt as administrator
4. Switch path to the InsydeH2OFFT_x86_WIN64_* folder.
5. Following generic commands shows how to start the BIOS Update for TQMx86 modules.
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
- Insyde Firmware Flash Tool folder InsydeH2OFFT_x86_LINUX64_* (BIOS-Tools → H2OFFT (UEFI Variable Editor) → Linux → X64 → InsydeH2OUVE_x86_LINUX64_*)
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and open terminal
4. Switch path to the InsydeH2OFFT_x86_LINUX64_* folder
5. Extract tar package tar -xvf InsydeH2OFFT_x86_LINUX64_portable_*.tar.bz2
6. Install H2OFFT Tool sudo dpkg -i InsydeH2OFFT_x86_LINUX64_*.deb
- If errors occur during driver installation, build driver manually:
7. Run following generic commands shows how to start the BIOS Update for TQMx86 modules.
Insyde Flash Tool Download Mac
H2OUVE (UEFI Variable Editor)
The H2OUVE (UEFI Variable Editor) allows to edit setup settings and variable data of the BIOS Image.
Prerequisites
- FAT formatted USB stick with at least 32 MB of free storage space
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
- Insyde UEFI Variable Editor H2OUVE-Sx64.efi (BIOS-Tools → H2OUVE (UEFI Variable Editor) → UEFI-Shell → InsydeH2OUVE_x86_EFI_* → H2OUVE-Sx64.efi)
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and navigate into the EFI Shell (Boot Manager > Internal EFI Shell)
4. After starting the EFI Shell switch path to the USB stick by typing fs0:.This depends on the amount of conected mass storage devices; with command ls you can check the content of the path.
5. The following command examples shows how to use the H2OUVE Tool.
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
- Insyde UEFI Variable Editor folder InsydeH2OUVE_x86_WINx64_* (BIOS-Tools → H2OUVE (UEFI Variable Editor) → Windows → X64 → InsydeH2OUVE_x86_WINx64_*)
- Copy appropriate BIOS file for your TQ module to the folder InsydeH2OUVE_x86_WINx64_*
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and run Command Prompt as administrator
4. Switch path to the InsydeH2OUVE_x86_WINx64_* folder.
5. Following command examples shows how to use the H2OUVE Tool.
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
- Insyde UEFI Variable Editor folder InsydeH2OUVE_x86_LINUX64_* (BIOS-Tools → H2OUVE (UEFI Variable Editor) → Linux → X64 → InsydeH2OUVE_x86_LINUX64_*)
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and open terminal
4. Switch path to the InsydeH2OUVE_x86_LINUX64_* folder
5.Extract package tar -xvf InsydeH2OUVE_x86_LINUX64_portable_.tar.bz2
6. Install H2OUVE Tool sudo dpkg -i InsydeH2OUVE_x86_LINUX64_*.deb
- If errors occur during driver installation, build driver manually:
7. Run following generic commands shows how to start the BIOS Update for TQMx86 modules.
H2OLRT (Logo Replacement Tool)
This instructions guide you through the procedure of replacing the Bootlogo in EFI-Shell, Windows and Linux.
The H2OLRT (Logo Replacement Tool) generates a BIOS file that contains the desired Boot Logo instead of the TQ Logo.
Prerequisites
- FAT formatted USB stick with at least 32 MB of free storage space
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
- Insyde Boot Logo Replacement Tool H2OLRT-Sx64.efi (BIOS-Tools → H2OLRT (Logo Replacement Tool) → UEFI-Shell → InsydeH2OLRT_x86_EFI_* → H2OLRT-Sx64.efi)
- The new Boot Logo Picture formated as *.jpg (e.g. picture.jpg)
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and navigate into the EFI Shell (Boot Manager > Internal EFI Shell)
4. After starting the EFI Shell switch path to the USB stick by typing fs0:.This depends on the amount of conected mass storage devices; with command ls you can check the content of the path.
5. The following shows how to start the Logo Replacement.
H2OLRT-Sx64.efi Variable description
| Variable | Description |
|---|---|
| <SrcBIOSImageName> | BIOS file in which the logo should be replaced |
| <LogoImagePathName> | Path and name of the replacement picture |
| <IndexNum> | Default index, where the picture must be stored. TQMxE39S = 1 |
| <ConvertNum> | 0 = keep original image's format and dimension. 1 [default] = auto convert the image's format and dimension. |
| <OutBIOSImageName> | path and name of the generated BIOS file |
H2OSDE (SMBIOS Data Editor)
The tool H2OSDE (SMBIOS Data Editor) facilitates easy modifications of any SMBIOS (DMI) field.
Prerequisites
- FAT formatted USB stick with at least 32 MB of free storage space
1. Unzip BIOS-Tools ZIP file and copy the following to the USB stick:
2. Insert the prepared USB Stick to a Starterkit USB port
3. Boot up the system and navigate into the EFI Shell (Boot Manager > Internal EFI Shell)
4. After starting the EFI Shell switch path to the USB stick by typing fs0:.This depends on the amount of conected mass storage devices; with command ls you can check the content of the path.
5. The following command examples shows how to use the H2OSDE Tool.
- navigate to the H2OSDE program path and open the program GUI.exe
Alternatively, the program can also be executed in the windows command prompt:
- navigate to the H2OSDE program path and run following command:
Alternatively, the program can also be executed in the terminal:
BIOS Update Utility H760 vPro
– Bug fix: Insyde tool screen is displayed instead of Fujitsu logo within BIOS update by Windows Update if HDD password authentication is enabled. – Bug fix: Fujitsu logo resolution is not the same between POST and BGRT if the logo is displayed to the external
Insyde Software
Find Insyde Software software downloads at CNET Download.com, the most comprehensive source for safe, trusted, and spyware-free downloads on the Web
Download Windows UEFI Firmware Update Platform …
The Windows UEFI Firmware Update Platform supports installing system and device firmware updates via driver packages on Windows 8. Learn how the system firmware update feature of Windows 8 works. To provide a more consistent, reliable firmware update
Download Windows UEFI Firmware Update Platform …
· The Windows UEFI Firmware Update Platform supports installing system and device firmware updates via driver packages on Windows 8. Learn how the system firmware update feature of Windows 8 works. To provide a more consistent, reliable firmware update
Updating Device Firmware using Windows Update
Updating Device Firmware using Windows Update 08/24/2017 4 minutes to read t D C N In this article This topic describes how to update a removable or in-chassis device’s firmware using the Windows Update (WU) service. For information about updating system
BIOS Update Utility (Windows 10 32bit)
At the VAIO Firmware Update Tool screen, verify the version to be installed is R0250DA, then click Update. At the The system will restart. Are you sure you want to update the VAIO firmware? dialog, click OK. Note: The computer will automatically shutdown
Tools and Techniques for Updating Enterprise …
· Download the PDF > Part two of Eclypsium’s series on best practices for firmware updates focuses on the tools and techniques used by the enterprise IT teams tasked with implementing update processes. Enterprise IT teams must maintain firmware on a wide
; This file is Insyde H2OFFT (Flash Firmware Tool) …
Intel firmware update tool (FWUpdLcl.exe) is dependent on each chipset generation, messagestringA05=”Insyde H2OFFT cannot run on battery power. Please plug in AC power and try again.” messagestringA06=”Please insert system battery.”
Flash Tool Download Win 7
Lenovo System Update: Update Drivers, BIOS and …
Updating Lenovo Drivers and Applications using Lenovo System Update About Lenovo Our Company News Investor Relations Sustainability
Download Sony BIOS drivers for Windows
Insyde Bios Update Tool
Download Sony BIOS drivers, firmware, bios, tools, utilities SOFTPEDIA® Windows Drivers Games Mac Android APK Linux News & reviews Softpedia > Drivers
New InsydeH2O BIOS update format
In line 61 I found that the file I wanted for flashing was isflashWin.bin but after a fast attempt with FreeDOS and the tool I mentioned before I realised that the format was not FD as it should so I googled a bit more. As it turns out, Insyde has released a new update
Download UEFI BIOS Updater 1.69.17.2 / 1.70 RC 20.1 / …
Download UEFI BIOS Updater – An efficient and reliable application whose main purpose is to update OROM/UEFI modules and the CPU microcode of an AMI UEFI BIOS What’s new in UEFI BIOS Updater …
Drivers en handleidingen downloaden
Zoek naar BIOS-updates, handleidingen, drivers en patches voor uw Acer-producten. Om u de best mogelijke ervaring te kunnen bieden, maakt deze website gebruik van profiling cookies van derden. Klik hier voor meer informatie over deze cookies en hoe u deze instellingen kunt wijzigen.